Friday, 16 August 2013

Kitchen Lithography

I came across this video on the website Printeresting on facebook recently and thought I'd give it a whirl. It describes how to use items from your kitchen to create lithography-type prints. How cool would that be?! I love the qualities of lithography but have never been able to try it for real.

The discussion below the video helps to puzzle out what some of the materials are as the video has no narration. One of the respondents Inkteraction generously provided their English translation of the materials and so here's what I did, making a few simplifications and using products at hand in NZ:

Gather materials: Plastic cutting mat (unused), aluminium foil, white vinegar, cola, vegetable oil, paper towels, chinagraph pencil, sellotape

Sellotape the foil to the plastic cutting mat and smooth it out.
Wipe the foil down with the white vinegar to clean it.
BEWARE any greasy fingerprints WILL print.
Draw your image onto the foil with a chinagraph pencil.
Hold the plate over the sink and pour over the cola, allowing it to sit for about 7 seconds to etch into the foil.
Rinse under cold water.

Clean the chinagraph pencil away using the vegetable oil on a paper towel.
Wet the plate with a damp towel.
Your image should show up as the oil repels the water from the areas of your drawing.

Using oil-based printing ink and keeping the plate wet with water, roll out the ink thinly and ink up.
This is where you will see any extra greasy finger prints that you left behind!

With the press set tightly, print on a smooth paper - I have just used cartridge paper here.
If you don't have access to a press you can print by using the back of a spoon to burnish the back of your paper.

The print shows up the lovely grainy textures of the drawing - just like grown-up's lithograhy without the massive stone. Give it a go! 

Thursday, 15 August 2013

Paintings - a selection

Cook's Bach, Rangitoto Island
Our Honeymoon suite (nfs)
2004, 635 x 850mm, acrylic on canvas

Nikau I,
Matheson's Bay, Leigh (sold)
2007, 720 x 960mm, acrylic on canvas

Pakiri Storm (sold)
2007, 630 x 430mm, acrylic on canvas

These Ancient Hills I
Rangitikei Hills (nfs)
2008, 630 x 440mm, acrylic on canvas

These Ancient Hills II
Rangitikei Hills (nfs)
2008, 630 x 440mm, acrylic on canvas

Duders Regional Park    $800
2004,   1225mm x 825mm, acrylic on canvas

Wednesday, 14 August 2013

Shadow Paintings

Although I am no longer painting shadows I am still "stopped in my tracks" when I chance upon a particularly fine display. Anyone in my company at the time of my ooohing and aaaahing and grabbing for the camera, seems to raise an eyebrow and smile at me with that "what is she on about" kind of look. Never mind, I simply see the transient beauty of the carpet laid out at our feet and I merely want to capture it so it can be savoured at leisure. Firstly, I'm drawn to the patterns, then to the inky velvety depths of the shadows and the contrasts of the acid highlights.

Generally I like to prepare my canvas or board with a coloured base coat as I like to allow it to peak through, adding to the tapestry-like richness of colour. When the painting uses a lot of green I like to use red as a base coat as I love the way it makes the greens "sing" when layered on top.

Cornwall Park (nfs)
2004, 825 x 675mm, acrylic on canvas

Coyle Park (sold)
2004, 750 x 170mm, acrylic on board

Coyle Park Shadows (nfs)
2005, 825 x 675mm, acrylic on canvas

Pt Chevalier Beach (sold)
2005, 1055 x 815mm, acrylic on canvas

Mt Eden (sold)
2006, 905 x 580mm, acrylic on canvas
 I was totally enchanted by the giant moth taking flight from the crater of Mt Eden while out walking one day. Didn't anyone else see it?

Monday, 12 August 2013

It's a Printing Press!

It works!
I am making-do with a laminated hardboard bed for now and I'm very happy with the results I'm getting so far. I've trialled it with printing a plexi-plate dry point with chine colle added and have also just given it a whirl with a "Kitchen Lithography" technique using aluminium foil and a chinagraph pencil drawing. 

Inked up plexi-plate with collage elements laid on ready to print.

Trial print using "Kitchen Lithography" technique.